Hello.
I am Dr. Hyuk-chan Cho, Director of Cleor Clinic Uijeongbu Branch.
"I've had lifting procedures, but the heavy feeling under my chin remains the same."
Have you ever felt that your facial contours are not neatly refined
even after receiving lifting treatments?
A dull facial contour is caused not only by sagging skin,
but also by the accumulation of fat in the double chin or under the cheeks.
If you only repeat lifting procedures while fat remains,
the heavy impression will not be easily resolved.
Therefore, an approach that combines the stage of reducing fat and the stage of restoring elasticity
is necessary,
and at the Uijeongbu branch, we perform these two stages separately using InMode.
Today, I will explain the principles of how Uijeongbu InMode works,
and the specific roles of the FX and FORMA modes.
What is Uijeongbu InMode?
👉 Uijeongbu InMode is a US FDA-approved lifting device that uses Radiofrequency (RF) and High Voltage Pulses (HVP)
to address fat reduction and elasticity enhancement in separate stages.
While many lifting procedures focus on pulling up sagging areas,
InMode is different in that it includes a fat reduction stage.
It is easier to understand if you compare it to tidying up a room.
First, you clear out unnecessary items taking up space,
and then you organize the remaining space to look good.
The FX mode takes the role of clearing out the items,
and the FORMA mode can be seen as the role of organizing the space.
Because it is an approach of emptying and filling rather than just pulling,
it is widely used for contours where both fat and sagging are present.
Effects and Advantages of Uijeongbu InMode
👉 The core advantages of Uijeongbu InMode can be summarized into three points:
customized step-by-step configuration, low-irritation procedure, and rapid return to daily life.
First, fat reduction and elasticity enhancement are divided into stages.
If accumulated fat in the contours is the concern, the FX stage is prioritized;
if loss of elasticity is the main concern, the FORMA stage is prioritized,
allowing for a configuration tailored to the skin condition.
Second, the burden of irritation during the procedure is relatively low.
Because it monitors epidermal temperature in real-time and adjusts energy,
it is known for its structure that reduces the risk of burns or blisters.
Finally, the return to daily life is fast.
Although mild heat or redness may occur after the procedure,
it is reported to subside within a few days in most cases.
Types of Uijeongbu InMode
👉 Uijeongbu InMode is divided into two types with different mechanisms: FX and FORMA.
FX acts on accumulated fat cells, such as those in a double chin or cheeks,
to refine the facial contour.
It is known that the treated fat cells do not regenerate.
FORMA delivers radiofrequency heat to the epidermis and dermis layers,
stimulating the production of collagen and elastin,
while refining both elasticity and the overall impression of the skin surface.
By combining both stages, you can take an approach of filling elasticity
into the areas where fat was removed to refine the contours.
Who is Uijeongbu InMode suitable for?
Those who found lifting alone insufficient for contour refinement
Those concerned about both double chin/cheek fat and sagging
Those who want to improve both loss of elasticity and skin surface impression
Those who are burdened by procedures with high pain levels
Those who need a quick return to daily life after the procedure
Side Effects and Precautions for Uijeongbu InMode
👉 Rather than being completed in a single session, Uijeongbu InMode
is a procedure performed over several sessions to match fat changes and collagen regeneration.
FX usually requires 3–4 week intervals as fat cell changes take time,
while FORMA is often repeated several times at 2-week intervals.
Temporary heat and redness may appear after the procedure,
but it is reported to subside naturally within 3–4 days in most cases.
In cases with significant fat volume or deep sagging,
a combination with other procedures may be recommended.
The procedure may be restricted in the following cases, so a prior consultation is necessary:
If pregnant or breastfeeding
If using internal electronic devices such as a pacemaker
If there are metal implants in the treatment area
If there are acute skin troubles or wounds in the treatment area
If diagnosed with an autoimmune disease
⚠️ Pre-treatment Precautions for Uijeongbu InMode
1–2 Weeks Before Treatment
If you have recently received other lifting or strong laser treatments,
please confirm the possible treatment schedule during your consultation.
2–3 Days Before Treatment
Excessive alcohol consumption can increase the possibility of redness or swelling after the procedure,
so it is recommended to reduce intake as much as possible.
Day of Treatment
Please visit the clinic with a clean face after washing.
If you are taking any medication or have internal medical devices,
please inform us during the consultation so it can be reflected in the settings.
⚠️ Post-treatment Precautions for Uijeongbu InMode
Day of Treatment
Wash your face gently with lukewarm water
and do not rub or apply strong pressure to the treated area.
Maintaining a warm sensation tends to help with the effectiveness.
3–7 Days After Treatment
It is recommended to refrain from alcohol, saunas, steam rooms, and strenuous exercise.
Please also postpone irritating treatments such as exfoliation for a while.
1–2 Weeks After Treatment
Strong peels or other high-energy procedures
should be performed at a certain interval for safety.
Please use sunscreen consistently.
❓ Frequently Asked Questions (FAQ)
Q. It's my first time with Uijeongbu InMode; should I get FX or FORMA first?
If double chin or cheek fat is the main concern, the FX stage is prioritized;
if loss of elasticity is more concerning, the FORMA stage becomes the focus.
They are often combined, so it depends on your skin condition.
Q. Can Uijeongbu InMode be performed with other lifting treatments?
It can be performed alongside procedures with different mechanisms by scheduling them accordingly.
However, simultaneous treatment with other radiofrequency-based procedures
requires interval adjustment, which will be reviewed during the consultation.
Q. Does redness last long after Uijeongbu InMode?
Heat and mild redness may occur after the procedure,
but it is reported to subside naturally within 3–4 days in most cases.
Q. How long do the effects of Uijeongbu InMode last?
It is known that fat cells treated with FX do not regenerate,
while elasticity changes from FORMA vary individually depending on collagen regeneration and lifestyle habits.
Q. How painful is Uijeongbu InMode?
Because it monitors temperature in real-time and adjusts energy,
many people feel it as a warm sensation.
However, the perception of pain varies by individual.
Contours that were not refined by lifting procedures alone
are often caused by accumulated fat along with sagging.
Uijeongbu InMode is a lifting option that approaches contours in two stages:
refining fat with FX and filling elasticity with FORMA.
The stage configuration and number of sessions suitable for your skin condition and fat distribution
will be determined during your consultation.
If you are concerned about a heavy double chin or dull contours despite lifting,
please feel free to visit Cleor Clinic Uijeongbu Branch.
Even before deciding on a procedure, we will provide detailed guidance on your contour status
and the appropriate care direction through a prior consultation.
※ This content is for general informational purposes, and results may vary by individual.
Please determine the exact diagnosis and whether to proceed with the treatment through a consultation with a specialist.